Rug Stick

• 1). Move the green switch on the Woolite Rug Stick to the lock position. This prevents the cleaning solution from spraying out while you are attaching it to the stick.
  
  
• 2). Remove the lid from the can of Woolite Heavy Traffic Rug Cleaner. Shake the can well.
  
  
• 3). Insert the can upside down, with the application end pointing down, into the stick. You will hear a click when it is appropriately secured.
  
  
• 4). Move the green switch on the stick to the spray position.
  
  
• 5). Place the stick on your rug with the brush facing upwards. Pull the stick toward you to release cleaning foam.
  
  
• 6). Turn the stick over so that the brush is pointing downward. Move the brush back and forth over the foam to rub it into the carpet. Move the brush in different directions to thoroughly clean the area.
  
  
• 7). Work in small areas, repeating Steps 5 and 6.
  
  
• 8). Allow the foam to dry completely. Vacuum the cleaned area to remove dried residue. If necessary, repeat Steps 5 and 6 for heavily soiled areas.
  
  
• 9). Use warm water to rinse the rug stick. Move the green switch back to the lock position before storing the stick.
  
  

Woolite Detergent

• 1). Mix 1 tbsp. Woolite Extra Delicates Care into 1 gallon warm water.
  
  
• 2). Dip a sponge into the Woolite mixture and gently rub the soiled area using circular motions. Wet the spot but do not soak it. For heavily soiled areas, use a scrub brush.
  
  
• 3). Leave the Woolite mixture on the rug for 15 to 20 minutes.
  
  
• 4). Use a clean, dry cloth to soak up excess liquid.
  
  
• 5). Leave the spot to air dry. Repeat the entire process as necessary.