A tractor is a vehicle used for pulling or pushing operations in construction or agriculture. Its parts are gears, axle, draw bar, lift arms, valve tappets, spare parts, hitch pins, clutches, accessories, trolleys, stabilizer pins, front dozer, shafts, wheels, etc.
Use of tractors leads to accidents often even when it is run at slow speeds. It happens when the user is not properly aware of the functions of tractor parts, not trained or qualified. The farmers suffer both physical and monetary loss due to this. In addition to training, a farmer is supposed to properly maintain the tractor by taking care of their parts to ensure it long life. Let us focus on its care and maintenance.
Get to know about the functions of all the parts and use them appropriately.
Learn how to correctly attach and detach them.
Do remember to clean the parts with a particular frequency.
Get them serviced regularly and repaired if needed.
Wheel must have enough pressure and replace them as and when needed.
Never ignore a spark from the ignition system solve its problem immediately.
Do not forget to keep one five-pound extinguisher.
Be more cautious while driving a tractor on the road. Also avoid applying brakes again and again.
Develop a practice to engage the clutch smoothly to avoid sudden acceleration. It hurts engine.
Keep the tractor at a constant speed and don't apply brakes suddenly. It consumes more fuel.
Never have sudden acceleration. Engage the clutch smoothly.
Don't overload while transporting.
Wheels are kept wide on both uneven road and even road.
Decrease the speed when rocks, humps or any other barrier come.
It is advisable to use employ the lower gear when going downhill.
Also remember to engage the clutch gently while going uphill especially.
Please never ever mount or dismount when it is running.
Keep brakes in a maintained condition and keep taking short brakes while working for long.
Keep a note of fine condition of safety pins on lift-wing implements.
Doing any changes with the draw bar is not your job unless instructed by the manufacturer.
The centre line of the rear axle is never require to be moved with halts or jerks around the axle housing or to the top link pin.
Never make any changes in the implements while they are getting operated.
Don't take sharp turns and lessen the velocity while turning.
Use good quality lubrication, fuel and water in sufficient quantities.
Do not refuel with the engine running.
Endure good ventilation before starting the engine to get rid of carbon monoxide, which is deadly.
You better stop the engine and remove the starter keys before getting down avoiding any accident.
While using a loader stay alert in case of speed as a loader does not let control the speed so easily. Overturns may take place.
Last but not the least, use it for the purpose it is meant for. Don't go for picnics or shopping like activities with it.
Use of tractors leads to accidents often even when it is run at slow speeds. It happens when the user is not properly aware of the functions of tractor parts, not trained or qualified. The farmers suffer both physical and monetary loss due to this. In addition to training, a farmer is supposed to properly maintain the tractor by taking care of their parts to ensure it long life. Let us focus on its care and maintenance.
Get to know about the functions of all the parts and use them appropriately.
Learn how to correctly attach and detach them.
Do remember to clean the parts with a particular frequency.
Get them serviced regularly and repaired if needed.
Wheel must have enough pressure and replace them as and when needed.
Never ignore a spark from the ignition system solve its problem immediately.
Do not forget to keep one five-pound extinguisher.
Be more cautious while driving a tractor on the road. Also avoid applying brakes again and again.
Develop a practice to engage the clutch smoothly to avoid sudden acceleration. It hurts engine.
Keep the tractor at a constant speed and don't apply brakes suddenly. It consumes more fuel.
Never have sudden acceleration. Engage the clutch smoothly.
Don't overload while transporting.
Wheels are kept wide on both uneven road and even road.
Decrease the speed when rocks, humps or any other barrier come.
It is advisable to use employ the lower gear when going downhill.
Also remember to engage the clutch gently while going uphill especially.
Please never ever mount or dismount when it is running.
Keep brakes in a maintained condition and keep taking short brakes while working for long.
Keep a note of fine condition of safety pins on lift-wing implements.
Doing any changes with the draw bar is not your job unless instructed by the manufacturer.
The centre line of the rear axle is never require to be moved with halts or jerks around the axle housing or to the top link pin.
Never make any changes in the implements while they are getting operated.
Don't take sharp turns and lessen the velocity while turning.
Use good quality lubrication, fuel and water in sufficient quantities.
Do not refuel with the engine running.
Endure good ventilation before starting the engine to get rid of carbon monoxide, which is deadly.
You better stop the engine and remove the starter keys before getting down avoiding any accident.
While using a loader stay alert in case of speed as a loader does not let control the speed so easily. Overturns may take place.
Last but not the least, use it for the purpose it is meant for. Don't go for picnics or shopping like activities with it.
Source...