- 1). Remove the water tank. Fill the tank with cold tap water up to the desired level (do not fill past the 40-minute line) and replace the tank cap. Reinsert the water tank in the Home Touch steamer.
- 2). Plug the steamer into an electrical outlet and move the power switch to "On." A light will indicate the steamer is on. Steam will emit after 45 seconds.
- 3). Hold the steamer up against your garments, passing the steam up and down along the garments until the wrinkles are released. Use the brush attachment(s) for extra cleaning. When satisfied, move on to the next garment. The Home Touch steamer will emit steam for up to 40 minutes, depending on how much water you added in Step 1.
- 4). Power off the machine when you have finished. If the water tank runs out, the Home Touch steamer will shut off automatically. Simply refill the tank to continue steam cleaning.
Source...