Removal of Stock Exhaust

• 1). Cut the exhaust pipe directly behind the muffler using a hack saw.
  
  
• 2). Remove the bolts on the flange that connects the muffler to the catalytic converter using a ratchet and socket. Remove the muffler from the vehicle.
  
  
• 3). Remove the stock tailpipe hangers off the factory mounts located on the frame by pulling them out of the rubber bushings with your hands.
  
  
• 4). Pull the stock tailpipe out of the vehicle.
  
  

Installation of New Exhaust

• 1). Slide the tailpipe hangers into the stock bushings located on the frame.
  
  
• 2). Lift the muffler into position. Slide one end into the tailpipe.
  
  
• 3). Install the flange onto the catalytic converter and tighten the bolts using a ratchet and socket.
  
  
• 4). Place the exhaust clamp that came with the kit over the muffler and tailpipe connection. Tighten the bolts using a ratchet and socket.
  
  
• 5). Start the vehicle and check for leaks in the system.