- 1). Examine any point where the horizontal rails of the wood panel meet the fence post, as this is where the panel is fastened to the post. In most instances, the rails of two adjacent panels meet in the middle of a given post, except corner posts and gate posts. Determine whether the post is fastened by nails or screws.
- 2). Hit a horizontal rail with a rubber mallet to drive the panel in tighter against the fence post, to expose the head of the two or three nails holding it in place without damaging the wood. Pull out the nails with a pry bar or claw hammer. Repeat for every point where the rails are fastened to the fence posts on either side. If the panel is fastened with screws, skip to Step 3.
- 3). Unscrew those screws holding the rails of the wood panel to the fence posts on either side.
- 4). Lift the wood fence panel and set it aside.
Source...