It is normal to do a lot of thinking and to examine a lot of information before you begin your first woodworking project.
Study and contemplation will take you so far, and there comes a point to set aside the study and go to work on the project.
Because woodworking as a hobby made up of precise attention to detail and following a careful plan, the results can be both rewarding and highly satisfying.
With your carefully chosen plan in hand, it is time to begin your project.
Naturally, you will carefully read and study the plan in the detailed instructions well in advance of your purchase of any word.
You will review them again you before you make your first cut on the would you have purchased.
Go over the plan carefully to be certain you understand all the instructions and to be sure what you are undertaking is something that fits your skill level and offers a reasonable assurance of success.
Review this the plans one more time, listing all the supplies you will need in order to guarantee that you will have them all before you start the project.
With your plans in hand, lay all the wood out and determine in advance where you will make each cut.
Considering such things as grain, color, and texture, choose the best part of each piece of wood for the appropriate part of the project.
In addition you should plan your cuts so they require a minimum amount of adjustments of your saw, assuming you're using a power saw.
The project will go more smoothly if you make all the same type of cuts in succession.
Examine the wood again to make certain that each surface is flat and straight.
Once all this preparation has been completed it is time to cut the joints.
Without any fasteners at this point, assemble everything to make sure the fit is a good one.
This is also a good time to practice the assembly process as outlined in the plans and instructions.
Following the prescribed procedures smoothly and in order is a skill practiced by every accomplished woodworker.
With smooth motions and as rapidly as comfortably possible, be sure that every joint is fully together before you go to the next.
Be careful and applying clamps; do not apply more pressure than necessary to guarantee the connection.
Also, be sure there is no blue visible on the outside of each joint.
Using an edge of a T-square, make certain any flat surface is indeed flat.
Check for squareness with the arm of the T-square.
All that remains, after removing any excess glue, is to assure that your project and dry without any disturbance and finished putting the area back in order and replacing your tools.
Study and contemplation will take you so far, and there comes a point to set aside the study and go to work on the project.
Because woodworking as a hobby made up of precise attention to detail and following a careful plan, the results can be both rewarding and highly satisfying.
With your carefully chosen plan in hand, it is time to begin your project.
Naturally, you will carefully read and study the plan in the detailed instructions well in advance of your purchase of any word.
You will review them again you before you make your first cut on the would you have purchased.
Go over the plan carefully to be certain you understand all the instructions and to be sure what you are undertaking is something that fits your skill level and offers a reasonable assurance of success.
Review this the plans one more time, listing all the supplies you will need in order to guarantee that you will have them all before you start the project.
With your plans in hand, lay all the wood out and determine in advance where you will make each cut.
Considering such things as grain, color, and texture, choose the best part of each piece of wood for the appropriate part of the project.
In addition you should plan your cuts so they require a minimum amount of adjustments of your saw, assuming you're using a power saw.
The project will go more smoothly if you make all the same type of cuts in succession.
Examine the wood again to make certain that each surface is flat and straight.
Once all this preparation has been completed it is time to cut the joints.
Without any fasteners at this point, assemble everything to make sure the fit is a good one.
This is also a good time to practice the assembly process as outlined in the plans and instructions.
Following the prescribed procedures smoothly and in order is a skill practiced by every accomplished woodworker.
With smooth motions and as rapidly as comfortably possible, be sure that every joint is fully together before you go to the next.
Be careful and applying clamps; do not apply more pressure than necessary to guarantee the connection.
Also, be sure there is no blue visible on the outside of each joint.
Using an edge of a T-square, make certain any flat surface is indeed flat.
Check for squareness with the arm of the T-square.
All that remains, after removing any excess glue, is to assure that your project and dry without any disturbance and finished putting the area back in order and replacing your tools.
Source...