You probably have never thought about it, but your garage floor takes a lot of abuse.
And contrary to popular belief, there will come a time when you'll have to replace it if you don't maintain and take care of it.
The solution to avoiding that costly repair is to coat your garage floor and preserve your floor.
It doesn't matter whether you have cement, wood, tile, or any other type of garage flooring it can be coated.
Benefits of coating your garage floor: In order to protect your floor from everyday damage, such as oil and grease stains, you'll want to coat the floor.
If you have a garage that is exposed to the elements, you can coat your floor to protect against the seasons such as winter or the summer heat.
Coating your garage floor: The most common coating used is epoxy coating.
Since most floors are made from cement, the following techniques should work for most garage owners: Thoroughly clean your floor.
Make all of the loose debris and dirt is gone before applying the coating.
First, you'll want to sweep the floor clean and then using natural cleaners that can bring up and out any stains and discolorations before applying the epoxy.
Simply hose the floor down to get rid of any remaining chemicals off of the floor.
Make sure to point the hose towards the open garage door so the water runs out of the garage.
You don't want any water remaining in the garage while you're coating your floor.
Make sure you stick to the manufacturer's directions when you mix and prep the epoxy coating.
You'll be able to find the instructions on the side of the can or a small leaflet that's included with the epoxy can.
Now you'll have to wait until the following day before applying the epoxy coating.
This ensures that the floor is completely dry and won't end up setting wrong or weakening the lasting effectiveness.
The next step is to use a long paint roller to evenly roll the paint along the entire garage floor.
Make sure to do it slowly so that you don't miss any spots.
In order to get into the tight spots like the corners and areas close to the walls, you'll want to use a narrow paint brush to apply the coating.
Now let the first coat sit for 24 hours and dry before applying the second coat.
The second coating will make sure that the epoxy is thick enough to protect the garage floor.
You'll only need two coats, but you'll also want to avoid parking your car in the garage for about one week.
As you're applying the coating, you'll want to start at the opposite end of the door so that you can exit without stepping on the fresh coating and messing up all of your hard work.
And contrary to popular belief, there will come a time when you'll have to replace it if you don't maintain and take care of it.
The solution to avoiding that costly repair is to coat your garage floor and preserve your floor.
It doesn't matter whether you have cement, wood, tile, or any other type of garage flooring it can be coated.
Benefits of coating your garage floor: In order to protect your floor from everyday damage, such as oil and grease stains, you'll want to coat the floor.
If you have a garage that is exposed to the elements, you can coat your floor to protect against the seasons such as winter or the summer heat.
Coating your garage floor: The most common coating used is epoxy coating.
Since most floors are made from cement, the following techniques should work for most garage owners: Thoroughly clean your floor.
Make all of the loose debris and dirt is gone before applying the coating.
First, you'll want to sweep the floor clean and then using natural cleaners that can bring up and out any stains and discolorations before applying the epoxy.
Simply hose the floor down to get rid of any remaining chemicals off of the floor.
Make sure to point the hose towards the open garage door so the water runs out of the garage.
You don't want any water remaining in the garage while you're coating your floor.
Make sure you stick to the manufacturer's directions when you mix and prep the epoxy coating.
You'll be able to find the instructions on the side of the can or a small leaflet that's included with the epoxy can.
Now you'll have to wait until the following day before applying the epoxy coating.
This ensures that the floor is completely dry and won't end up setting wrong or weakening the lasting effectiveness.
The next step is to use a long paint roller to evenly roll the paint along the entire garage floor.
Make sure to do it slowly so that you don't miss any spots.
In order to get into the tight spots like the corners and areas close to the walls, you'll want to use a narrow paint brush to apply the coating.
Now let the first coat sit for 24 hours and dry before applying the second coat.
The second coating will make sure that the epoxy is thick enough to protect the garage floor.
You'll only need two coats, but you'll also want to avoid parking your car in the garage for about one week.
As you're applying the coating, you'll want to start at the opposite end of the door so that you can exit without stepping on the fresh coating and messing up all of your hard work.
Source...