- 1). Check the connection between the Charmglow gas grill fuel line and the propane tank or natural gas line. Hand tighten the gas line fitting on a propane tank or push the quick connect fitting on a natural gas line to check the connection.
- 2). Apply a small amount of soapy water to connection points and turn on the gas. Watch for signs of bubbles. Turn off the gas, tighten the fitting and check again. Wipe off soapy water with a wet rag.
- 3). Raise the lid of the Charmglow grill. Turn on the gas supply from the propane tank or natural gas line.
- 4). Select a burner to initially light and turn the corresponding control knob to high.
- 5). Press the ignition button and hold in the depressed position for up to five seconds. Release the button when the burner ignites.
- 6). Turn on other Charmglow burners by rotating the corresponding control knob to the high position. Adjust the heat setting on the grill as desired with the control knobs.
Source...